cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
pezh4088
Paper Tape
Posts: 2
Registered: ‎11-26-2014
Location: Boulder
Views: 5,090
Message 1 of 3

efi network 0 for ipv4 boot failed

according to search results I restarted and in BIOS Hard Disk is WDC WD10S21X-24R1BTO-SSHD-8GB
Social Support Agent
Social Support Agent
Posts: 5,822
Registered: ‎02-11-2012
Location: PH
Views: 5,024
Message 2 of 3

Re: efi network 0 for ipv4 boot failed

hi pezh4088,

 

Welcome to the Lenovo Forums.

 

Can you try the following:

1. Force the machine to boot from the HDD by doing one of the following:

   a. During boot-up, press F12 and select the HDD

   b. In the BIOS, navigate to the Startup or Boot Tab and ensure that the First Boot Device is set to the Boot Device

        - Link to picture

        - Link to picture

 

2. Boot from the hidden partition on the HDD (you can do this by pressing F2/Fn+F2 on bootup or via the OneKey Recovery button).

     - Link to picture

 

If you still can't boot into the HDD then it's likely that the device is malfunctioning (you can verify this by running a diagnostic on the drive via the Data Lifeguard Diagnostic for DOS). If you get an error during the diagnostic test, consider contacting lenovo for warrany service or you can replace the entire drive.

 

 

Regards



Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Follow us @LenovoSupport on Facebook and Twitter!

pezh4088
Paper Tape
Posts: 2
Registered: ‎11-26-2014
Location: Boulder
Views: 5,017
Message 3 of 3

Re: efi network 0 for ipv4 boot failed

how can I contact with lenovo? Do I need to mail in my laptop? How long would it take?

Check out current deals!


Shop current deals

Top Kudoed Authors