cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
BruceOlsen
Paper Tape
Posts: 1
Registered: ‎12-02-2014
Location: United States
Views: 3,085
Message 1 of 4

BIOS update 7ccn62ww fails on U430 Touch

I've downloaded the last 2 BIOS updates and neither is able to complete flashing the BIOS on my U430 Touch.

 

Most recently I tried 7ccn62ww. After rebooting to flash the BIOS, the update utility stops with the following messages:

 

>>> In the upper left on a black background:

 

LoadImage() Failed!  Access Denied

Error: Update BIOS Failed!

UnloadImage() Failed! Invalid Parameter

 

>>> And in a blue dialog box in the center of the screen:

 

InsydeH20 - Secure Flash

Error: Firmware update failed!!!

Please press any key to reset system. . . . . .

 

Link to image

 

I haven't changeed any of the BIOS defaults.

 

 Any help will be greatly appreciated.

 

 

Moderator comment: Image(s) converted to link(s). For helpful information, please see: About Posting Pictures In The Forums.

Highlighted
VSG
Paper Tape
Posts: 3
Registered: ‎07-14-2014
Location: Russia
Views: 3,010
Message 2 of 4

Re: BIOS update 7ccn62ww fails on U430 Touch

Saw a similar message on U330p.
I turned off Secure Boot in BIOS and flash without errors.

tzr916
Ctrl-Alt-Del
Posts: 12
Registered: ‎01-07-2015
Location: Stockton CA
Views: 2,928
Message 3 of 4

Re: BIOS update 7ccn62ww fails on U430 Touch

I too was unable to update BIOS, so I disabled Secure Boot, update BIOS was successful. Went back into BIOS and now Secure Boot is Enabled but the Secure Boot Status is Disabled and grayed out/cannot change. What do I do to get Secure Boot Status to Enabled?

 

 

IMAG0173

tzr916
Ctrl-Alt-Del
Posts: 12
Registered: ‎01-07-2015
Location: Stockton CA
Views: 2,895
Message 4 of 4

Re: BIOS update 7ccn62ww fails on U430 Touch

Got secure boot status to enabled by using the recommended solution of "Reset to Setup Mode" and "Restore Factory Keys".

Check out current deals!


Shop current deals

Top Kudoed Authors