cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
elli
What's DOS?
Posts: 1
Registered: ‎04-02-2010
Location: Germany
Views: 825
Message 1 of 3

Need Help: Start Window 7 only via BIOS Setup

Hello,

 

may somebody can help me:

 

I can only start Windows 7 or the Quicksetup on my brandnew S12 if I make a short visit to the bios setup.

 

The problems started yesterday with a long PIIIIIEP after pressing the start button. Then - the windos start stopped - und I saw a line on the screen that I saed that I can enter the setup with F2.

After pressing F2, joining the BIOS setup und leaving it without any changes - windows was starting.

 

This is the prozedure which I have to go through since then - with windows 7 and the QuickStart.

 

Has anybody an idea how I can go back to the normal startup?

 

Thanks,

elli

tulisan
Token Ring
Posts: 125
Registered: ‎02-23-2010
Location: manila
Views: 817
Message 2 of 3

Re: Need Help: Start Window 7 only via BIOS Setup

did you put any password in the BIOS?

Community Moderator
Community Moderator
Posts: 2,375
Registered: ‎01-21-2009
Location: DE
Views: 761
Message 3 of 3

Re: Need Help: Start Window 7 only via BIOS Setup

Hi and welcome ..

... if there is a BEEP at first every time ..its warning ...something is wrong ...

first  take a look at settings in BIOS ...

at the CONFIG Page you can set Quickstart off/on at start ...

BEEP OFF/ON at AC/ DC/Battery

set both to off or [disable]

save with F10 and exit ...

Should start windows 7 without BEEP & QS ...

 

regards and lots of eastereggs Smiley Happy

KalvinKlein

 

PS: again BEEP Code table ...

 

Symptom or error FRU or action, in sequence

One beep and a blank, unreadable, or flashing LCD.
1. Reseat the LCD connector.
2. LCD assembly.
3. External CRT.
4. System board.

 

One long and two short beeps, and a blank or unreadable LCD.
1. System board.
2. LCD assembly.
3. DIMM.

 

Two short beeps with error codes.
Two short beeps and a blank screen.
1. System board.
2. DIMM.

 

Three short beeps, pause, three more short beeps, and one short beep.
1. DIMM.
2. System board

 

One short beep, pause, three short beeps, pause, three more short beeps, and one short
beep. Only the cursor appears.
Reinstall the operating system.

 

Four cycles of four short beeps and a blank screen.
System board

 

Five short beeps and a blank screen.
System board

 

 

 

 

  

Yoga Home 900 - Yoga 2 11- Yoga tablet 2 all WIN 10 1809
Moto Z Play - Moto Z2 Play

Check out current deals!


Shop current deals

Top Kudoed Authors