Showing results for 
Search instead for 
Do you mean 
Reply
Punch Card
Posts: 5
Registered: ‎11-09-2009
Location: Germany
Message 111 of 119 (6,665 Views)

Re: Fan Control for the S10(e) - user-developed solution

with the NHC you can not control directly the fan...

i need onlye the program" S10Fan" for my S10-2

 

 

Punch Card
Posts: 10
Registered: ‎03-25-2009
Location: New Zealand
Message 112 of 119 (6,133 Views)

Re: Fan Control for the S10(e) - user-developed solution

Is there a way to shut the fan up when one is using windows 7?

Punch Card
Posts: 7
Registered: ‎11-04-2008
Location: Malaysia
Message 113 of 119 (5,603 Views)

Re: User-developed Fan Control for the S10(e)

I've tried using S10fanctrl,

to see if it works, I set it to manual - off.

since then my fan does not work anymore, not even during bios post.

now it idles at 80c, and constantly shuts off due to over heat.

 

Lenovo S10

Model 20015

Bios version 14CN94WW

 

please advise

 

Serial Port
Posts: 54
Registered: ‎04-11-2009
Location: Germany
Message 114 of 119 (5,587 Views)

Re: User-developed Fan Control for the S10(e)

That sounds similar to the battery detection problem. I would recommend to check if the problem can be solved with the same actions:

 

- remove AC-adapter and battery

- wait 30 seconds

- replace battery and AC-adapter

- test

- if it does not work, redo it with holding down the power button for 30 seconds.

 

Greetings

 

Carsten

Punch Card
Posts: 7
Registered: ‎11-04-2008
Location: Malaysia
Message 115 of 119 (5,565 Views)

Re: User-developed Fan Control for the S10(e)

Thank you for your prompt reply. I was ready to go to the service center.

It took a few tries, but eventually the fan came back.

Tried playing with S10fanctrl again and everything works as advertised.

 

I use MobileMeter to monitor speedstep freq, temp and batt watt drain.

When S10fanctrl set to manual - off, MobileMeter always reports 35c.

When S10fanctrl set to manual - Lvl3, MobileMeter always reports 80c.

Just FYI.

What's DOS?
Posts: 1
Registered: ‎11-21-2010
Location: ro
Message 116 of 119 (4,292 Views)

Re: User-developed Fan Control for the S10(e)

great. working great for windows but WHAT ABOUT LINUX ???
it's driving me mad..
What's DOS?
Posts: 3
Registered: ‎02-19-2011
Location: NEW YORK
Message 117 of 119 (3,837 Views)

Re: User-developed Fan Control for the S10(e)

i had the same problem of running s10 fan control with windows 7, but it does work.   just need to run it in compatibility mode!!

Paper Tape
Posts: 1
Registered: ‎04-18-2011
Location: Türkiye
Message 118 of 119 (3,600 Views)

Re: User-developed Fan Control for the S10(e)

[ Edited ]

Does this program works on S10-3c?

I measured core temperature with CoreTemp. When I boot netbook fan doesn't work. After loading windows 7 fan is working. Until 55 degre fan speed is normal but after 55 degrees fan speed is increasing and working loudly. I upgrade the BIOS version from 3CCN09WW to 3CCN13WW. But this is doesn't work. What can I do for solve this problem?

 

Posts: 2,371
Registered: ‎01-21-2009
Location: DE
Message 119 of 119 (3,567 Views)

Re: User-developed Fan Control for the S10(e)

Hi and welcome,

No that program works only on older model. S10(e) . Newer model like S10-3 (& s / c / t) will not work different chipset and fan control register...

 

sincerely KalvinKlein

Yoga 2 - Yoga tablet 2 - Yoga Home 900 - ThinkPad X220 All Win 10
top kudoed authors