Welcome to our peer-to-peer forums, where owners help owners. Need help now? Visit eSupport here.

English Community

Datacenter Systems ManagementLenovo XClarity
All Forum Topics
Options

4 Posts

01-12-2021

Austria

3 Signins

15 Page Views

  • Posts: 4
  • Registered: ‎01-12-2021
  • Location: Austria
  • Views: 15
  • Message 1 of 6

Wrong hardware after updating to XClarity Administrator 3.1.1

2021-01-12, 12:28 PM

We have been running XClarity Administrator 3.0.0 and all the nodes were fine. 

After upgrading to XClarity Administator 3.1.1, suddenly some nodes started transitioned into critical state and start to show following error:

 

The health of SSD Drive.M.2_Bay0 in bay 0 of the RAID configuration ThinkSystem M.2 SATA 2-Bay RAID Enablement Kit has diminished to a critical state.


However there is no RAID configured on those nodes and there is only one M2 installed. This looks like a bug to us, as this was working fine with XCLA 3.0.0

 

 

Reply
Options

603 Posts

08-14-2018

United States of America

581 Signins

10469 Page Views

  • Posts: 603
  • Registered: ‎08-14-2018
  • Location: United States of America
  • Views: 10469
  • Message 2 of 6

Re:Wrong hardware after updating to XClarity Administrator 3.1.1

2021-03-15, 19:57 PM

@ timeu,

 

Hello I was going through the posts and noticed that this has not been answered in quite some time. I am not an LXCA expert but I would like to try and help you as much as I can. Can you please let me know if this is still an issue for you? 

 

wrote:

We have been running XClarity Administrator 3.0.0 and all the nodes were fine. 

After upgrading to XClarity Administator 3.1.1, suddenly some nodes started transitioned into critical state and start to show following error:

 

The health of SSD Drive.M.2_Bay0 in bay 0 of the RAID configuration ThinkSystem M.2 SATA 2-Bay RAID Enablement Kit has diminished to a critical state.


However there is no RAID configured on those nodes and there is only one M2 installed. This looks like a bug to us, as this was working fine with XCLA 3.0.0

 

 

 

Reply
Options

4 Posts

01-12-2021

Austria

3 Signins

15 Page Views

  • Posts: 4
  • Registered: ‎01-12-2021
  • Location: Austria
  • Views: 15
  • Message 3 of 6

Re:Wrong hardware after updating to XClarity Administrator 3.1.1

2021-03-15, 20:10 PM

@arosett: Yes it's still an issue. we have 11 nodes that show the error.

Reply
Options

247 Posts

04-20-2015

Canada

336 Signins

1964 Page Views

  • Posts: 247
  • Registered: ‎04-20-2015
  • Location: Canada
  • Views: 1964
  • Message 4 of 6

Re:Wrong hardware after updating to XClarity Administrator 3.1.1

2021-03-15, 20:33 PM

The error is basically saying "this should be in Raid1, but I'm only seeing 1 of the two mirrored drives here".

Curious to see what the resolution is, XCA bug or fw bug.

 

Are you running on the single-slot M.2 enablement kit or the dual-slot M.2 enablement kit?

Reply
Options

4 Posts

01-12-2021

Austria

3 Signins

15 Page Views

  • Posts: 4
  • Registered: ‎01-12-2021
  • Location: Austria
  • Views: 15
  • Message 5 of 6

Re:Wrong hardware after updating to XClarity Administrator 3.1.1

2021-03-15, 20:43 PM

EDIT: sorry this was from another node that shows a similar error:

 

The health of SSD Drive.Bay_15 in bay 15 of the RAID configuration Bay 7 has diminished to a critical state.

 

Hmm looking at the XClarity Inventory I can see this:

 

0 drives configured in RAID [ThinkSystem M.2 with Mirroring Enablement Kit] storage pool, 0 JBOD drives, 0 unconfigured drives

0 drives configured in RAID [ThinkSystem 430-16i SAS/SATA 12Gb HBA] storage pool, 0 JBOD drives, 0 unconfigured drives

0 drives configured in RAID [Bay 7] storage pool, 0 JBOD drives, 0 unconfigured drives

0 drives configured in RAID [Bay 7] storage pool, 0 JBOD drives, 0 unconfigured drives

0 drives configured in RAID [ThinkSystem M.2 with Mirroring Enablement Kit] storage pool, 0 JBOD drives, 0 unconfigured drives

 

Reply
Options

4 Posts

01-12-2021

Austria

3 Signins

15 Page Views

  • Posts: 4
  • Registered: ‎01-12-2021
  • Location: Austria
  • Views: 15
  • Message 6 of 6

Re:Wrong hardware after updating to XClarity Administrator 3.1.1

2021-03-15, 20:51 PM

This is the inventory of the node with the original error message:

 

0 drives configured in RAID [ThinkSystem M.2 SATA 2-Bay RAID Enablement Kit] storage pool, 0 JBOD drives, 0 unconfigured drives

0 drives configured in RAID [ThinkSystem M.2 SATA 2-Bay RAID Enablement Kit] storage pool, 0 JBOD drives, 0 unconfigured drives

 

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete

X

No, I don’t want to share ideas Yes, I agree to these terms