05-14-2019 11:03 PM
My apologies for the wrong information.
1. Please refer the article to back up the XCC configuration. How to back up and restore the XClarity Controller configuration using the Lenovo XClarity Essential...
2. Reset the XCC to factory default through UEFI.
a. Power on the server and press F1 to enter System Setup page, Lenovo XClarity Provisioning Manager menu will be displayed.
b. From left menu, select "uEFI Setup" => "BMC Settings" => "Reset Factory Defaults Setting" then enter to restore default.
c. After that, all changed setting backed to default so you can login to XCC by using defaut USERID/PASSW0RD (0 is zero).
*if you are using static IP, also this setting was gone so check valid IP address after XCC restor to default setting.
3. Refer to the article mentioned in step1, use the restore command to restore the saved configuration file to the XCC.
05-14-2019 11:13 PM
05-14-2019 11:45 PM