03-14-2017 07:25 AM - edited 03-15-2017 03:27 AM
My Lenovo Yoga 300 had a 500gb hdd and i decided to change it in order to boost it a bit, i cloned it and changed from ide to ahci. it works as it was on sata2 (sandisk dashboard shows it as sata2 ), even though the yoga (based on specifications) has sata3.It also performs as a sata2 interface.I would like to know if there is any driver aviable or what can i do , because they advertise it as sata 3 but it seems no to be.
03-15-2017 03:19 AM
Thanks for using the Lenovo forums.
What make is the SSD? Are you using any adapters to use it?
Let us know how you get on.
Did someone help you today? Thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
03-15-2017 03:24 AM
the ssd is connected to the yoga through the sata connector in the inside of the laptop. this is the ssd:https://www.amazon.es/SanDisk-SSD-Plus-interno-lectura/dp/B00S9Q9VS4