05-22-2017 12:40 AM
My 2 year old Lenovo Ideapad Yoga 13, Palm rest was not working.hence I replace the plam rest cover. I also remove i again replace Hindges to resolve hard hindges issue.
But when I re-assemble the laptop, when I turn On, nothing displayed on the screen, but you can see the screen is on. I keep it running for some time and try to connect via remote desktop, I am able to access my laptop without any problem and everything working fine.
What could be the reason? I specifically check all connections 2 times,
Note: 1. When I press "F9", I can feel the turn ON/OFF of the screen,but still blank screen.
2. I never face such problem before.
3. I also removed black strip at bottom of the LCD screen to remove, hindges for cleaning.
Kindly suggest solution.
05-22-2017 07:08 AM
Welcome to the Community Forums.
As everything is booting and with a usable touch pad, most likely the LCD cable /panel assembly needs to be rechecked as it may have loose connections or got issue during the replacement since it is sensitive in those areas.
Recheck the connection or if you have a spare cable / LCD to test with. See if anything on the hinges got impinged or obstructed. See if the screen would work without the hinge connection too.
Update us how it goes.
05-25-2017 05:57 AM
Try to connect the laptop with any external monitor and check for display.
If you have display on the external then after checking on the LCD cable only leaves us with the LCD panel itself.
You may need to check the LCD panel and cable with another machine or try a compatible known good LCD and cable to test the display.