02-04-2014 10:57 PM
I purchased a Toshiba Dynadock U3.0.
After connecting my LAN cable to the HUB, how do I get the Yoga to recognize the Internet connection ?
At the moment, only the wireless works?
All else (USB 2.0 & 3.0 connnections as well as the HDMI out work just fine).
Would appreciate some guidance here !!
Thanks in advance.
Solved! Go to Solution.
02-05-2014 08:51 PM
Took the advice and ran a Windows Update.
Sure enough, one of the updates had something to do with an Ethernet Adapter.
After installing and resetting, no change.
I opened up the device in the Control Panel and low and behold, the USB Ethernet adapter was not on.
When the USB Hub was attached, Windows automatically installed the drivers.
This time I used the CD provided with the Hub to install the driver set and guess what ?
I'm an idiot.
Lucky, but still an idiot.
After installing the drivers on the CD provided, I now have a functioning Ethernet connection.
Let that be a lesson.
Always check the install !!
Thank you for the advice, it eventually led me to the right solution.