Showing results for 
Search instead for 
Did you mean: 
Lenovo Staff
Views: 1,760

Note: The following information pertains only to px-Series network devices. If you have any other StorCenter network device, including ix-Series devices, this does not apply to you. 

Before adding new hard drives to your StorCenter px-Series network device, please be sure to familiarize yourself with the following information. If you still have any additional questions about this topic, feel free to post them below. 

Supported Drives: 
For the current list of drive brands and models that have been tested with the StorCenter px devices and are supported for use, please visit Our approved hard drive list is still growing! Please check back with the list often or subscribe for updates by clicking on the "Notify Me" button on the above link. 

Important: All disks within a single storage pool must meet the following requirements: 


  • Same manufacturer 
  • Same rotational speed 
  • Same capacity

Failure to meet these requirements may result in unpredictable device behavior and will not be supported by Iomega. If you need technical assistance, please be prepared to backup your data and remove any unsupported drives or configurations. 

Pre-Installed Drives: 
If you purchased your px device either fully or partially populated with drives, the device’s operating system resides partially on the drives. To replace all of the drives from the original configuration, follow the steps here:

Was this information helpful?


Thanks so i can upgrade to a 6tb drive in the px6 300