cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
JBrines
Paper Tape
Posts: 7
Location: GB
Views: 671
Message 1 of 2

Access to CMM via SSH

Hi All,

 

I need to access the CMM to run the following command crypto -cs tls1.2svr -T mm[p]

 

I can SSH to the server but command is not recognised. I can login to the IMM but cannot see anything about CMM

 

Thanks

 

John.

Lenovo Employee SSCOLA
Lenovo Employee
Posts: 3
Location: GB
Views: 341
Message 2 of 2

Re: Access to CMM via SSH

 Hi John,

can I refer  you to pg. 109 (crypto command section) in the Flex System Chassis Management Module Command-Line Interface Reference Guide

 

If command syntax is not correctly entered, or if a command fails to run, an error message is returned. See “Common errors” on page 385 for a list of error messages that apply to all commands or “crypto command errors” on page 402 for a list of error messages that are specific to the crypto command.
 

http://flexsystem.lenovofiles.com/help/topic/com.ibm.acc.cmm.doc/dw1kt_cmm_cli_book.pdf

 

Here is the user guide for the Chassis Mangement Module. You can always double check the settings and cofiguration from the Web interface ( if you can ).

http://flexsystem.lenovofiles.com/help/topic/com.ibm.acc.cmm.doc/dw1kt_cmm_ug_pdf.pdf

 

Let me know if this help you with your query.

Top Kudoed Posts