cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
HughR
SCSI Port
Posts: 54
Registered: ‎05-24-2009
Location: CA
Views: 72
Message 1 of 2

M93 p falls asleep during Lenovo Solution Center hardware scan

I have a ThinkCentre M93p Tiny.  It has thrown surprising Linux kernel "oops"es a couple of times in the last month.  So I decided that I should run hardware diagnostics.

 

I booted into Windows 10 and ran the Lenovo Solution Center.  I chose hardware scan.  I asked for a memory diagnostic.  And went to bed -- a good memory diagnostic takes hours to run and should be completely boring.

 

When I came back, I found the machine had suspended.  When I woke it, the memory diagnostic had made almost no progress.  When I repeat, it seems as if Windows wants to suspend the machine after about 15 minutes or half an hour of no user input.

 

What's the appropriate way to stop Windows suspending the machine while I'm running diagnostics?

HughR
SCSI Port
Posts: 54
Registered: ‎05-24-2009
Location: CA
Views: 70
Message 2 of 2

Re: M93 p falls asleep during Lenovo Solution Center hardware scan

It gets worse. Twice the Solution Center has said that the test was canceled, which it wasn't, at least not by me. But the result code says all was well.

Check out current deals!


Shop current deals

Top Kudoed Authors