cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
megaododo111
Paper Tape
Posts: 2
Registered: ‎07-15-2019
Location: GB
Views: 152
Message 1 of 2

M93p tiny xeon e3 1275l v3 DRAM Error on boot

Hello, just got an M93P Tiny and xeon e3 1275L v3 used.  If I only use one DIMM in the upper slot the machine will boot but with any memory installed in the lower slot (either single or both slots used) then I get the 3 short 1 long beep code.

 

I have 4 momory modules all work in my old M92p Tiny but no combinations works (I have 2x 4GB and 2x 8GB).

 

Looking at the manual it says reseat, or replace memory and if that does not resolve then replace the system board.  But before going down this route could this be any issue with the CPU or anything else I should try like update the bios?

 

Thanks

megaododo111
Paper Tape
Posts: 2
Registered: ‎07-15-2019
Location: GB
Views: 135
Message 2 of 2

Re: M93p tiny xeon e3 1275l v3 DRAM Error on boot

Updated to the latest bios, this improved the CPU power management and is now running at normal temps.  One other thing I did notice is the fan speed does not increase when the CPU temp is getting hot (my M92p speeds up at 70 deg C).  Suspecting a system board issues but has any one had issues like this with the Xeon CPU?  Could I have a CPU issue?

 

Thanks

Check out current deals!


Shop current deals

Top Kudoed Authors