Showing results for 
Search instead for 
Did you mean: 
Serial Port
Posts: 32
Registered: ‎05-24-2015
Location: IL
Views: 448
Message 1 of 2

Replacing motherboard in Lenovo M93p -Type 10A7 mini-tower Model # A01400

Iam an IT technician.


The motherboard  [(1P) SA70A09685 ASM (03T7251) for MB FRU W7] on my Lenovo M93p -Type 10A 7 Model # A01400 S/N PB012YNY has died.


If I install a micro-ATX motherboard such as one of the following: 


1. Asus H81M-D

2. Gigabyte GA-B85M-D2V Retail

3. Gigabyte GA-H97M-HD3


Will the CPU, power supply and other components in the mini-tower work or do you recommedn only installing the same "Lenovo" motherboard?


Thank you so much,


Bit Torrent
Posts: 2,650
Registered: ‎12-11-2015
Location: US
Views: 442
Message 2 of 2

Re: Replacing motherboard in Lenovo M93p -Type 10A7 mini-tower Model # A01400

The CPU and RAM should not be an issue as long as the new board supports them, but I believe the M93p model's power supply only has a 14-pin connector to the system board rather than the standard 24-pin connector, so you will probably need a new PSU with a standard 24-pin connector to power your new motherboard.      


Another issue you might run into is the front panel connectors, so make sure that you take note of those and label them before removing the old board.


Best of luck,

Check out current deals!

Shop current deals

Top Kudoed Authors