12-07-2011 12:34 AM
I am currently attempting to switch out my HDD for an SDD on my e220s.
In order to 'reset' my new SSD to the original factory settings, I created a boot flash drive on my 16giger.
when I try to boot from the flash drive, all I get is a blank screen with a blinking cursor. What gives??
I did all the 'diskpart' stuff and made sure that the flash drive is "active."
The directory for my recovery flash drive is as follows:
Please help. I just received my laptop today, and this is an extremely frustrating!
12-07-2011 09:39 PM - edited 12-07-2011 09:40 PM
This problem is usually do to the missing "active" flag, but you've already addressed that.
Try booting the flash drive on another machine. If it isn't a Lenovo (and maybe if it is, but isn't an e220s) it won't boot all the way up. It will probably start R&R, then reboot. The point here is to verify that it's bootable at all.
If it isn't, the problem is with the flash dive or how it was made bootable. Another thing you might try is to spin up a Linux live CD and use fdisk to verify the active setting of the flash drive's partition.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.
The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored - questions and answers belong in the forum so that others may contribute and benefit. ... GeezBlog