10-17-2009 03:08 PM
My daughter's R61E's original 80GB Hitachi HDD drive recently self destructed, it was totally dead, confirmed by the Lenovo PC Doctor for DOS I downloaded off their website while trying to troubleshoot the problem. As a result;t there is no drive to Clone, and the problem, I am facing is that I also do not have the recover discs for this PC. I bought a new 250GB Hitachi HDD drive in the same formatted swapped it out, with the intent of loading up XP from the OEM disc I hold a license for. The problem, however, is that this XP Disc can't "see" the new drive, I get an error message that it's no drive is installed. Up updated the BIOS to the most current version, I also tried running the "Lenovo 2.5 SATA Hard Drive Firmware Update Utility (ver 1.0) that I got off of their site, figuring that maybe the increased capacity need a firmware update to be compatible. Well, this program, which runs at boot up, does show the new drive as being present, but does not allow the firmware update - it gave a message stating that the "drive must have an associated Lenovo part number installed " in order for this program to work...back to square 1....
So how do I get the drive to install so I can reload XP and rebuild my system....?
Solved! Go to Solution.
10-17-2009 04:35 PM
Sorry I can't help much YET ! I am in exactly the same position at the moment. It is as though Windows can't see the sata disk if it is unformatted, and I don't have another computer to format the 2.5 disk !
See the reply I received in post http://forums.lenovo.com/t5/R-Series-ThinkPad-Laptops/R61-Hard-drive-info-wanted-SATA-Model/td-p/164...
Andys Reply is here
"Not being able to install a clean XP is because XP doesn't have the SATA driver you need. You can either slip stream it into an installation cd which you create yourself or, take the easy route and change the BIOS settings in Config > SATA to Compatibility Mode from AHCI."
10-17-2009 04:43 PM
I actually was just reading that reply to your post and am trying it now...seems to be working as it is letting me format the new HDD,,,stand by and I will post how I make out....
10-18-2009 01:35 AM
You can change the setting back to SATA, but only after installing the Intel Matrix Storage Driver. Make sure you read and follow the installation instructions on the site, you'll need to scroll down quite a way.
The relevant part starts; "Note: If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure:"
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + pointsDid you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos
Please add your type, model number and OS to your signature, it helps to help you.
Forum Search OptionT430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more.
FYI Unsolicited Personal Messages will be ignored.Deutsche Community Comunidad en Español English Community Русскоязычное СообществоPepperonI blog
10-19-2009 07:48 PM
That worked like a charm, thanks! Now on to the mystery "SM Bus Controller" listed under Device manager/other devices and get that working, and the wireless card too (see my other post_