02-05-2012 05:34 PM
I purchased two (2) Lenovo Thinkpad L420 laptops in October 2011 details:
Processor: Intel Core i5-2520M CPU @ 2.50GHz
RAM: 8.00 GB
System type: 64-bit OS
OS: Windows 7 Professional (SP 1)
Whilst 1 laptop continues to work perfectly, since yesterday I have an annoying problem with the other L420.
Problem: When I turn on the laptop (or "restart") it goes straight to the "Rescue & Recovery" screen. After reading a similar issue on this forum, I pressed the F1 button to start the laptop in BIOS mode. And, if I press F9 to restore the factory settings the laptop then boots perfectly. However, the issue returns at the next reboot.
I hope someone can help to fix this frustrating problem.
Thanks in advance
Solved! Go to Solution.
02-08-2012 05:24 AM
Kindly make sure after the notebook starts it is not interrupted by any key.
If this is not the scenario then start the notebook and update the BIOS.
Kindly download the BIOS update from the mentioned below web link.
The issue should be fix after updating the BIOS.
02-08-2012 01:46 PM
Thanks so much for taking the time to reply.
Last night, before reading your reply, I had spoken to a Lenovo Help Desk and they, too, suggested that updating the Bios might work.
Taking this advice, I updated all the relevant "critical" & "optional/non critical" files from the Lenovo "TVSU" programme. At first nothing improved - the laptop still kept booting to "Rescue & Recovery" mode.
In frustration, I gave up and went to bed.
This morning, again before reading your message, I powered on the laptop and nearly fell off my chair when it booted perfectly! I decided to check for consistency and I've shut down/restarted several times and, so far, the laptop is consistently functioning perfectly again. Perhaps, the BIOS updates from the Lenovo TVSU needed time to take effect?
Since everything is working well again, I've saved the file you've given but haven't installed it. Is that ok, or should I also install this update you've provided?
Again, thanks for your time and help.
02-10-2012 06:23 AM
02-10-2012 06:36 AM
Good to know that your system is working fine.
You can keep the updated BIOS file and run it after working on the system for couple of days.
02-10-2012 07:39 AM
Perhaps, the BIOS updates from the Lenovo TVSU needed time to take effect?
Just a WAG on my part, but maybe you needed a cold boot after that BIOS update, rather than just a reboot.
Is it possible that's what happened?
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.
The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog