1.Prolonging battery life-cycle by the "do not charge when battery charge is above nn% which by default is 96%. How about setting it manually to much smaller value. 50%-60%. Would that prolong batterly life-cycle? (When I dont want to charge the battery)
2. All parameters set to small values for using as little energy as possible for extending the time when nly battery power is available: The temperature is still (far too) high underneath where (center-center) the ventilation gaps are. How come? The only process take CPU-power is logmon.exe from IBM/Lenovo...
3. Logmon.exe is alway running at about 15% CPU... How can I change that?
4 Is the screen background light gas-filled? If so, will the life-cycle shorten if it turns on/off to frequently? (Light timeout value to low)
Thank you IBM/Lenovo for this site.
-Tom Hummel, Norway ThinkPad Z60m 2529-FJG P M 760(2GHz), 1GB RAM, 100GB 5400rpm HD, 15.4in 1680x1050 LCD, 128MB ATI Radeon X600, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Secure chip, IEEE 1394, Fingerprint reader, 6c Li-Ion batt, WinXP Home
2) Look at the Z60m part list or into the HMM in order to detect which parts/components are sitting there, this will give you some hint what parts might get heated up a lot near the thermal device.
3) AFAIK logmon.exe is part of or belongs to ThinkVantage rescues & recovery. - If it runs as a service on your OS, then you can disable that service or maybe you can just change the scheduling times for that monitor service inside r & r. A look into the r & r manual, which can be found on Lenovo's website, might can tell you more about this.
4) Look for yourself here, CCFL backlights for notebooks have usually a life time of 15.000 till 30.000 hours. Yes in practise the life-time will shorten, but this is common for all electronic devices over time.
ThinkPad T60/X32/600/770 · IBM IntelliStation · 3x IBM SpaceSaver II