English Community

ThinkPad NotebooksThinkPad: T400 / T500 and newer T series Laptops
All Forum Topics
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 1 of 105

Fingerprint Reader not working upon waking from sleep for windows login

2014-05-16, 19:36 PM

Hello,
I have a brand new T540P with a Validity fingerprint reader. 

 

Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.

 

Things I have tried

-uninstalling/installing device in device manager and finger print manager pro software

-setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options

-disabling "allow windows to turn off this device to save power" in device manager.

 

I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.

 

Is this a platform wide issue affecting all T540P models? This is frusterating. 

 

 

Solved! See the solution
Reply
Options

9605 Posts

12-27-2009

CA

3310 Signins

95263 Page Views

  • Posts: 9605
  • Registered: ‎12-27-2009
  • Location: CA
  • Views: 95263
  • Message 2 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-16, 20:30 PM
Haven't heard about this issue before.

If it stops working after resume, does putting it back into sleep then resuming again make it work?

W520: 2960XM, Q2000M @ 1091/1380, 32GB RAM, 500GB&750GB HDD & 500GB SSD, FHD&MB168B+
X61T: L7500, 4GB RAM, 500GB HDD, XGA screen, Ultrabase
W550s: 5600U, K620M at 1164/1281, 16GB RAM, 512GB SSD, 3K touchscreen
X200s: SL9400, 6GB RAM, 64GB SD card, WXGA+ screen
TPT1: 1839-23U
Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 3 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-16, 23:45 PM

Just checked, that doesn't appear to make a difference. I will continue checking it every time the issue appears, but upon a cursory evaluation, no, putting it back into sleep doesn't make a difference.

 

Thanks for the swift response Colonel!

Reply
Options

6018 Posts

10-29-2009

NC

17490 Signins

156063 Page Views

  • Posts: 6018
  • Registered: ‎10-29-2009
  • Location: NC
  • Views: 156063
  • Message 4 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-19, 17:56 PM

We have heard of this issue previously from a couple other users but have never been able to reproduce this.  We have tested this literally on dozens of ThinkPads thousands of times.  We've asked Validity for their help also to see if they have any idea what could cause this. We have never seen this issue ourselves.

 

I believe from your info that you are running Win8.1 but please correct me if I'm wrong about that.  Can you try an experiement?  Run "Lenovo Settings", go into the Power section and then disable 30-day standby.  Then reboot so this change takes effect.  Does the problem happen with 30-day standby disabled?

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 5 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-19, 21:47 PM

Too bad you couldn't be here! This issue happens more often than not.

 

I am running Windows 8.1 x64 Professional with all updates (both drivers and windows). 

 

I disabled 30-day standby and will check in to see if that helps. Again, it is unpredictable when it will happen.

 

In addition, I find that sometimes the touchpad and wifi/bluetooth randomly disable. The WiFi issue happens much less often after updating intel AC7260 driver directly from Intel (Lenovo version is out of date) but my bluetooth mouse still experiences random periods of being disabled. Turning mouse on and off does not help, must enable/disable bluetooth on computer (sometimes works) or reboot (always works).

 

The random trackpad issue still occurs, however. During this time the little rubber nub in the keyboard is still functional.

 

Thanks!

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 6 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-21, 1:20 AM

Someotherguy,

 

Reporting back here. Disabling 30 day standby does not appear to make a signifigant difference. The issue still occurs. I will see if the frequency of this issue goes down.

 

Meanwhile, it appears that this issue is not an isolated event. My computer is a brand new replacement. Do I need to be concerned about returning the unit? Do the other T or W series models experience similar issues, if I were to swap this model out for another?

 

Best,

Colin

Reply
Options

6018 Posts

10-29-2009

NC

17490 Signins

156063 Page Views

  • Posts: 6018
  • Registered: ‎10-29-2009
  • Location: NC
  • Views: 156063
  • Message 7 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-21, 13:42 PM

sailoholic

 

Your report is the first we have ever heard of this issue on T/W.  It does not happen on my T/W systems here (with or without 30 Day Standby enabled).  The other reports I heard of this problem came from X240.

 

I just want to confirm with you - the problem happens after coming out of Sleep (and not Hibernate), right?

 

Can you tell me exactly what you are doing?  e.g.

1.  Use the computer normally (is AC attached or not?)

2.  Close the lid - the computer goes to sleep  (or do you go to sleep some other way?)

3.  Open the lid 2 hours later (or how long)?

4.  are you using a dock?

 

The more info you can provide, the better.  Thanks for your help.

Also please let me know what BIOS version you have.

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 8 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-05-27, 21:10 PM

Someotherguy,

In response to your questions:

  1. This happens irrespective of whether the AC adapter is attatched or not
  2. I usually put computer to sleep by closing lid
  3. I believe the issue primarily happens after letting computer rest for some time period (1-3 hours) but I have witnessed it occuring right after putting computer in sleep mode.
  4. I am not using a dock
  5. Hibernation is disabled in Power Settings

I will see if I can disable Intel Rapid Start Tech (Intel's name for "30 day standby") in the BIOS and report if this makes any difference.

 

Do I need to be concerned with replacing this unit? It appears to be somewhat random as others have experienced the same issue on various forums. This is also my 2nd T540P to experience the same issue, as stated above. 

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 9 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-01, 17:45 PM

Someotherguy,

Just checking in again.

I have tried the following since I last posted.

 

1.  New driver was released through windows update, my device now comes up as "Synaptics FP Sensor" in device manager, not Validity. This driver makes an insignifigant improvement. I cannot really tell a difference. 

2. I uninstalled Lenovo Fingerprint Manager Softare, Password Manager, the Synaptics FP Sensor driver, Validity Driver, reset fingerprint data in BIOS, deleted Fingerprint data in windows control panel. I then installed just the synaptics FP Sensor driver. I then used the windows 8.1 biometrics settings in control panel to add a fingerprint. I had the most success with this option, but still the reader will occasionally not work at boot from standyby.

 

Any suggestions?

THANK YOU!

Reply
Options

9 Posts

06-02-2014

United States

14 Signins

132 Page Views

  • Posts: 9
  • Registered: ‎06-02-2014
  • Location: United States
  • Views: 132
  • Message 10 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-02, 9:29 AM

I too am experiencing this issue. The FPR will often not come online when resuming from sleep mode, and I will have to re-enter sleeo mode another time or two for it to work.

 

This is a brand new T440s, and it's really irritating.

Reply
Options

3 Posts

11-10-2013

Germany

6 Signins

33 Page Views

  • Posts: 3
  • Registered: ‎11-10-2013
  • Location: Germany
  • Views: 33
  • Message 11 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-02, 16:15 PM

I'm having the same troubles, talked to my reseller but he didn't even get the problem.

 

For me the fingerprint is not a problem anymore, I use it entirely from startup not at the logon screen.

But the issue with the touchpad persists and is driving me mad!

From time to time it just doesn't work and I can't change it.

I cannot reproduce it but it happens really often. Sometimes it works again after closing the lid and opening it again, right now I have restarted 4 times and it still doesn't work.
I've reinstalled the driver, installed windows completely new, nothing helps.

During the whole time the Trackpoint keeps working, I'm also able to scroll or do other gestures with the touchpad, I just can't move the cursor and make a click by tapping(not clicking/pressing the touchpad down).
My mouse settings are somehow weird during the incidents(see attachment)

 

I did experience the WiFi problems but the problems I get now from WiFi are caused by the router.

 

I'm running a T440s, clean Windows 8.1 Pro N installation.

 


I would really love a fix for these problems.

PS: I have already thought of excuses for usage in public since a thinkpad not working properly is such a shame!mouse settings

Reply
Options

8 Posts

01-19-2009

Maryland, USA

11 Signins

96 Page Views

  • Posts: 8
  • Registered: ‎01-19-2009
  • Location: Maryland, USA
  • Views: 96
  • Message 12 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-03, 13:54 PM

I have the same problem on my brand new T440s, the fingerprint reader doesn't come on after sleep.

 

I did notice however, that often the light is not on, but if I do swipe my finger it will recognize it anyway!

So maybe it's just the light not turning on?

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 13 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-05, 21:01 PM

It appears that many people are having similar issues. Can we please get a reply, especially concerning the fingerprint issue? This is critical for my business application and I am frustrated that I have received very little support from Lenovo on this issue. I purchased from the ThinkPad Series for their reknowned reliability and support that I have had in the past, but I am starting to regret purchasing the T540P for my company. 

 

Best,

Colin

Reply
Options

8 Posts

01-19-2009

Maryland, USA

11 Signins

96 Page Views

  • Posts: 8
  • Registered: ‎01-19-2009
  • Location: Maryland, USA
  • Views: 96
  • Message 14 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-06, 1:30 AM

It just happend to me again and I found something interesting:

 

Pressing Windows+L (lock) while already on the lock-screen made the fingerprint reader come alive again!!

 

Trying to re-produce if it will work every time..

Reply
Options

9 Posts

06-02-2014

United States

14 Signins

132 Page Views

  • Posts: 9
  • Registered: ‎06-02-2014
  • Location: United States
  • Views: 132
  • Message 15 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-15, 12:37 PM

Win key + L does not work in my situation. Can we please get an update, as this appears to be a common problem?

Reply
Options

6018 Posts

10-29-2009

NC

17490 Signins

156063 Page Views

  • Posts: 6018
  • Registered: ‎10-29-2009
  • Location: NC
  • Views: 156063
  • Message 16 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-16, 14:07 PM

funnyfarm299

 

When fingerprint device doesn't work, can you please look in Device Manager?

Is "Biometric Devices" category present?

Is there a device listed in this category?

What is the status of it (double click on it and tell me what it says in the "Device status" box)?

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 17 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-16, 17:01 PM

Someotherguy,

Thank you for responding again to this topic. I am sure funnyfarm299 appreciates your help, but I would really like to receive some assistance as well, considering that I originally started this topic. 

 

The device is listed as "validity sensors (WBF) (PID=0017)" 

The status is always "this device is working properly"


it should be noted that once I am logged on I have absolutely 0 problems with the fingerprint reader. The issue only arises upon login at the windows login screen.

 

Also, there is alternate driver available from windows update that changes "validity sensors" to "Synaptics Fingerprint Sensor". This driver performs slightly better, I think, but the difference is negligible. 


Thanks again!

Reply
Options

6018 Posts

10-29-2009

NC

17490 Signins

156063 Page Views

  • Posts: 6018
  • Registered: ‎10-29-2009
  • Location: NC
  • Views: 156063
  • Message 18 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-16, 17:46 PM

sailoholic

 

I think your issue is different than funnyfarm299's issue.

For your case I would like you to try a different troubleshooting step (although we stlil have no idea what the problem is because we can't reproduce it):

 

1.  Open Event Viewer

2.  Expand "Applications and Services Logs"

3.  Expand "Microsoft"

4.  Expand "Windows"

5.  Expand "Biometrics"

6.  Click on "Operational"

7.  Now, on the right-handle panel "Actions", click on "Enable log".

8.  Close Event Viewer and then use the computer normally.

9.  The next time the problem happens, go back into Event Viewer to the Biometrics log.  Thinking about the time that the problem happened, can you find an "Error" log corresponding to that time?

 

Reply
Options

9 Posts

06-02-2014

United States

14 Signins

132 Page Views

  • Posts: 9
  • Registered: ‎06-02-2014
  • Location: United States
  • Views: 132
  • Message 19 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-17, 0:25 AM

No, my issue is EXACTLY the same as the other user. The fingerprint reader works almost all the time. It is only occasionally after sleep mode when the device does not come online. After I log in, the device works fine and I can use it for other applications such as lastpass.

 

I will also enable event logging and see what shows up.

Reply
Options

9 Posts

06-02-2014

United States

14 Signins

132 Page Views

  • Posts: 9
  • Registered: ‎06-02-2014
  • Location: United States
  • Views: 132
  • Message 20 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-17, 6:37 AM

Had it happen again tonight. In the event log, normally when the computer resumes from sleep mode, it produces about 5 events.

However, when this occurred, the only one event was logged.

 

"The Windows Biometric Service completed a vendor-specific operation for sensor: Synaptics FP Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\F624D6C1818E).

The command was directed to the biometric unit's "Sensor Adapter" component."

 

This is getting really annoying. It happens pretty regularly.

Reply
Options

19 Posts

03-11-2014

Seattle

20 Signins

122 Page Views

  • Posts: 19
  • Registered: ‎03-11-2014
  • Location: Seattle
  • Views: 122
  • Message 21 of 105

Re: Fingerprint Reader not working upon waking from sleep for windows login

2014-06-17, 19:59 PM

Someotherguy,

 

Following your advice, I noticed the following. The below data is from a login attempt at at 12:07 when the fingerprinter reader did NOT work. Below is my log. I will try to keep better data to correlate what the log says and what is actually happening in the future. expect a followup shortly.

 

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1017
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service completed a vendor-specific operation for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26). The command was directed to the biometric unit's "Sensor Adapter" component.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1017</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.864352500Z" />
<EventRecordID>52</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="8040" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="Component">1</Data>
<Data Name="ControlCode">0x443114</Data>
<Data Name="OperationStatus">0x0</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1016
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service failed to complete a vendor-specific operation for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26). The command was directed to the biometric unit's "Sensor Adapter" component. The operation failed with error: 0x442124
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1016</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.847339700Z" />
<EventRecordID>51</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="12084" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="Component">1</Data>
<Data Name="ControlCode">0x442124</Data>
<Data Name="OperationStatus">0x1f</Data>
<Data Name="ErrorCode">0x80098036</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1017
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service completed a vendor-specific operation for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26). The command was directed to the biometric unit's "Engine Adapter" component.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1017</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.829331200Z" />
<EventRecordID>50</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="3252" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="Component">2</Data>
<Data Name="ControlCode">0x442198</Data>
<Data Name="OperationStatus">0x0</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1016
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service failed to complete a vendor-specific operation for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26). The command was directed to the biometric unit's "Engine Adapter" component. The operation failed with error: 0x442198
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1016</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.812315000Z" />
<EventRecordID>49</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="12160" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="Component">2</Data>
<Data Name="ControlCode">0x442198</Data>
<Data Name="OperationStatus">0x80004005</Data>
<Data Name="ErrorCode">0x80004005</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1017
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service completed a vendor-specific operation for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26). The command was directed to the biometric unit's "Engine Adapter" component.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1017</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.795302900Z" />
<EventRecordID>48</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="12864" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="Component">2</Data>
<Data Name="ControlCode">0x442198</Data>
<Data Name="OperationStatus">0x1f</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:11:56 PM
Event ID: 1108
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service successfully created a Biometric Unit for sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26) The sensor's mode is "Basic," and its pool-type is "System." See the "Details" pane for additional information about the sensor's new configuration.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1108</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:11:56.735264800Z" />
<EventRecordID>47</EventRecordID>
<Correlation />
<Execution ProcessID="9764" ThreadID="11364" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:07:00 PM
Event ID: 1508
Task Category: BioCredProv
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Credential Manager successfully retrieved the credential state for Lenovo-PC\Colin (S-1-5-21-4169344382-187148744-3073520468-1002).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1508</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>2</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:07:00.618412300Z" />
<EventRecordID>46</EventRecordID>
<Correlation />
<Execution ProcessID="7700" ThreadID="3660" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SID">S-1-5-21-4169344382-187148744-3073520468-1002</Data>
<Data Name="Username">Lenovo-PC\Colin</Data>
</EventData>
</Event>

Log Name: Microsoft-Windows-Biometrics/Operational
Source: Microsoft-Windows-Biometrics
Date: 6/17/2014 12:07:00 PM
Event ID: 1004
Task Category: WBioSrvc
Level: Verbose
Keywords:
User: SYSTEM
Computer: Lenovo-PC
Description:
The Windows Biometric Service successfully identified Lenovo-PC\Colin (S-1-5-21-4169344382-187148744-3073520468-1002) using sensor: Validity Sensors (WBF) (PID=0017) (USB\VID_138A&PID_0017\C3AC627BDA26).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Biometrics" Guid="{A0E3D8EA-C34F-4419-A1DB-90435B8B21D0}" />
<EventID>1004</EventID>
<Version>0</Version>
<Level>5</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-17T19:07:00.600399500Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="7700" ThreadID="10848" />
<Channel>Microsoft-Windows-Biometrics/Operational</Channel>
<Computer>Lenovo-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BiometricSensor">Validity Sensors (WBF) (PID=0017) (USB\VID_138A&amp;PID_0017\C3AC627BDA26)</Data>
<Data Name="SensorAdapter">WinBioSensorAdapter.DLL</Data>
<Data Name="EngineAdapter">vcsWBFEngineAdapter.DLL</Data>
<Data Name="StorageAdapter">winbioStorageAdapter.DLL</Data>
<Data Name="DatabaseID">{1000F3B5-9412-490E-97BA-4AA5A1A171AE}</Data>
<Data Name="SensorMode">1</Data>
<Data Name="SensorPool">1</Data>
<Data Name="SID">S-1-5-21-4169344382-187148744-3073520468-1002</Data>
<Data Name="Username">Lenovo-PC\Colin</Data>
</EventData>
</Event>

 

 

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save