cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
sunnyk
Paper Tape
Posts: 2
Registered: ‎09-09-2011
Location: UK
Views: 387
Message 1 of 3

T400 Died, No Power, No Light at all

Hi There,

 

I have some problem with my T400.

 

It will not boot at all. When I plug in AC adaptor, there is no light at all. presing the start button does not have any affect. I have removed the battery and connected only on AC Adaptor, it shows no light.

 

I have tried, pressing start button 10 mins, then holding start button for 30 secs, then connect to AC adaptor (Battery removed) and press Start. It has shown the AC power light but it did not boot.

 

I attached the battery and after that no light at all and even if I take the battery off, it still does not show any light at all while connected to AC adaptor.

 

AC adaptor is absolutely fine as it works on another Lemovo machine.

 

I have also tried pulling CMOS out and leaving it disconnected overnight but still no light come up when I replug AC adaptor.

 

What could be the problem and how can I resolve this.

 

Thanks in advance.

ashleyt24
Paper Tape
Posts: 1
Registered: ‎09-09-2011
Location: Los Alamos
Views: 375
Message 2 of 3

Re: T400 Died, No Power, No Light at all

I have the same problem. somebody knows how to solve it?

free list of cccam server available
all the rings necklaces earrings bracelets brooches jewelry available
JJJGram
Paper Tape
Posts: 1
Registered: ‎09-09-2011
Location: Latrobe, PA
Views: 358
Message 3 of 3

Re: T400 Died, No Power, No Light at all

I have the same problem. Even had it in for repair, but of course it powered right up for them!!

Check out current deals!


Shop current deals

Top Kudoed Authors