12-17-2010 02:21 AM - last edited on 01-03-2011 07:38 PM by JameZ
I am noticing that right after I use Alt-Tab to switch windows, my first swipe on the touchpad usually doesn't work.
This is frustrating since I do Alt-Tab all the time.
Any fix for this?
edit on topic to match discussion.
Solved! Go to Solution.
01-03-2011 04:05 PM
01-03-2011 04:09 PM
alee5789 you are right after alt-tab first swipe on the touch pad doesn't work :\ at first I was under the impression that this is just my imagination, but now I tasted it several times and it happens every time.
I can confirm this as well
01-03-2011 07:39 PM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
01-04-2011 01:23 AM
01-04-2011 01:24 AM
I started writing a reply and was going to say that, after my keyboard had been replaced (two times was the charm) and all of the Smart Check Settings unchecked, this was the remaining issue.
Then I wondered if I did indeed uncheck all the Smart Check Settings. That's when I tinkered with the only one I can't turn off...PalmCheck.
Voila! If I set PalmCheck to minimum or close to minimum, I don't experience this issue. However, I believe factory setting is near the maximum.
I have tested so much for Lenovo, I should be on its payroll :-) I think Lenovo really needs to do much more testing before rolling out its products. Especially with all these input device issues, which I thought (before I got my ThinkPad) was supposed to be ThinkPad's strong point. It turns out, due to a variety of problems (defective hardware, bad drivers, bad settings), I have never had a worse experience with input devices in all my years of owning computers. This is a fact, not an exaggeration....
At least I got this one finally figured out :-)
01-04-2011 01:37 AM
I noticed the same...with two-finger swipes I had to move PalmCheck to minimum or very close to it for it to not lag. With one-finger swipes I can get away with a middle range PalmCheck setting.
Let me know if this solves the problem for you.
01-04-2011 01:57 AM
01-26-2011 11:52 PM
I actually had this problem with both my Windows 7 home laptop and my Windows XP work laptop (which I just got yesterday - T410).
I remember that I had to roll the Ultranav version back on my Windows 7 machine to solve this problem. I checked last night and I was still on version 126.96.36.199.
Try the 188.8.131.52 version and see if this makes it better for you. It has already made a night and day difference for me.