el 06-09-2011 07:25 PM
Hello,
Does anyone know how to run set a mPCIe to boot? I am looking to make an SSD (Supertalent Corestore MV) my bootdrive from the PCIe slot.
http://www.supertalent.com/products/ssd_category_detail.php?type=CoreStore
Thanks
el 06-11-2011 12:52 PM
That won't work on the T410s. The T420s has mSATA support.
el 06-11-2011 01:24 PM
It's not mSATA like the Intel 310. It's PCI-E SSD -- with a marvel controller
All I'm looking for is the ability to boot from the card itself... so the bio would need to recognize the PCIe as a harddrive
06-11-2011 06:51 PM - editado 06-11-2011 06:57 PM
mSATA and mini or micro PCIe are overloaded terms in this case and the same. It is not supported with the T410s.
el 06-13-2011 08:16 PM
PCIe SSD does not always equal mSATA. For example there are full size PCIe cards for desktops, and this card may be a laptop version.
If the card works at all, you will want to find out of the T410 supports boot over PCI-E. Everything I found by googleing pointed to the idea that you will not be able to boot over PCI-E.
All is not lost and you could try a chain boot, by loading something like GRUB on your current HD and then having GRUB boot from the PCI-E drive. YMMV.
06-15-2011 09:49 PM - editado 06-15-2011 09:51 PM
ThorsHammer wrote:mSATA and mini or micro PCIe are overloaded terms in this case and the same. It is not supported with the T410s.
The mPCIe is working right now. mSATA is not supported - even though the form factor allows it (if in mPCIe). I have attached a screen shot...
http://imageshack.us/photo/my-images/19/pciessd.jpg/
My issue is the bios as Nibs eluded too
06-17-2011 12:43 PM - editado 06-17-2011 12:47 PM
So you have the CoreStore MV installed in the the ThinkPad T410s WWAN card slot?
el 06-21-2011 10:11 PM
Correct