08-22-2012 09:23 PM
I'm on Windows 7 Ultimate, all drivers are installed. When i start laptop camera blinks once, like all lamps(Caps Lock, etc).
How can i start that camera ? Is like i don't have it. Skype tell me that i don't have camera. Another website also told me that can't detect webcamera.
08-23-2012 07:44 AM
What is your machine type and model number?
Hope this helps,
08-31-2012 04:26 AM - edited 08-31-2012 04:46 AM
I'm sorry, but where I can see this information ? I have Enabled in BIOS function for Fn button because i saw in other post that
for camera start i need to press Fn + F6, but still doesn't work.
Isn't this machine type and model - ThinkPad T520 ?
Fn function key work, because i tried with Fn + F4 wich put laptop on standby mode.
08-31-2012 10:39 AM
machine type/model # is located on a sticker on the bottom of your laptop. it'll be 7 characters (4 dash 3 format). example, my x220 is a 4286-CTO.
hth to clarify.
09-01-2012 01:41 AM - last edited on 09-10-2012 07:42 AM by zoltanthegypsy
Yes, I found my machine type is T520 4243-GD4.
So I download drivers for T520(4243) but is still the same. In Device Manager i have 3 'Other Devices'. All drivers are installed... I can't update their drivers.
Moderator note: image larger than 50k converted to link per forum rules: Lenovo Community Participation Rules
09-01-2012 07:25 AM - edited 09-01-2012 07:26 AM
for each of those three:
double-click to open up the Properties sheet and then select the Details tab.
then, select Hardware Ids from the Property drop-down and copy the first line shown in the Value box.
(here's an example of what you might see: PCI\VEN_8086&DEV_109A&SUBSYS_200117AA&REV_00)
post each here and we'll try to help further.
09-01-2012 07:32 AM
Base System Device first line of value is:
Network Controller is:
Unknown Device is:
09-01-2012 02:06 PM
Base System Device first line of value is:PCI\VEN_1180&DEV_E823&SUBSYS_21CF17AA&REV_05
ricoh card reader, i believe. have a look at:
Network Controller is:PCI\VEN_10EC&DEV_8176&SUBSYS_819510EC&REV_01
not sure. please expand the network adapters section in device manager and let me know what you see there.
Unknown Device is:ACPI\LEN0068
power management driver. have a look at:
09-02-2012 01:12 AM - edited 09-02-2012 01:15 AM
Base System and Unknown are ready now. Here is for Network:
And if need same information first line of value in Propertries/Details/ Hardware ... is:
This is for Network adapter - Intel(R) 82579LM Gigabit Network Connection...
09-10-2012 05:26 AM
Ok, after some drivers and tools installation from official site now Fn button is working. Fn + F6 should turn on camera + microfone properties panel, but when start its show me only properties for microfon. Like i don't have camera.