English Community

ThinkPad NotebooksThinkPad: X Series Laptops
All Forum Topics
Options

55 Posts

12-11-2018

US

366 Signins

2327 Page Views

  • Posts: 55
  • Registered: ‎12-11-2018
  • Location: US
  • Views: 2327
  • Message 1 of 28

BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-25, 16:13 PM

Starting this thread so people can post their experiences with BIOS 1.17.

 

 

Poll response options (you can copy and paste the applicable option below into your reply):

 

1) Updated to BIOS 1.17 and also changed graphics from hybrid to discrete in BIOS and rebooted successfully.

 

2) Updated to BIOS 1.17 successfully, but have not changed graphics settings in BIOS.

 

3) Still on BIOS 1.15, but planning to switch to 1.17 shortly.

 

4) Planning to stick with 1.15 for now.

 

 

I'll start things off:

I do not use Linux (not currently at least). I have an X1 Extreme and I fall under scenario #3 above - I am still on 1.15, but planning to switch to BIOS 1.17 soon.

Reply
Options

2201 Posts

04-20-2008

US

19272 Signins

109326 Page Views

  • Posts: 2201
  • Registered: ‎04-20-2008
  • Location: US
  • Views: 109326
  • Message 2 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-25, 16:53 PM

1) Updated to BIOS 1.17  on a P1 and also changed graphics from hybrid to discrete in BIOS and rebooted successfully.

 

Flaky behavior by Lenovo Vantage app offering me updated drivers when everything was current. If you accept, then the installation will eventually hang. No other issues noted and my HDMI audio is working properly.

 


P53 XEON 2276 BIOS 1.23 OLED UHD 4K Multi-touch display, 96GB RAM, RTX5000, RAID 1, 1TB x 2 Samsung PM981, 1TB PM981, WWAN
P70 XEON 1505, BIOS 2.35, 4k Display, 64GB, M3000M NVIDIA GPU, RAID1 1TB Samsung PM981 PCIe-NVMe SSD x 2, 2x Samsung 850 Pro 1TB SSD. EM7455 WWAN
P1. BIOS 1.25,Xeon Processor, 4k UHD IPS multi-touch display, 32GB, PM981 1TB x 2, RAID1

I am not an employee nor an agent of Lenovo.
Reply
Options

58 Posts

12-10-2018

SG

779 Signins

3597 Page Views

  • Posts: 58
  • Registered: ‎12-10-2018
  • Location: SG
  • Views: 3597
  • Message 3 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-25, 22:19 PM

Running on bios v1.17 and discrete graphics mode, no issues so far.

Reply
Options

599 Posts

05-24-2018

CA

1231 Signins

9100 Page Views

  • Posts: 599
  • Registered: ‎05-24-2018
  • Location: CA
  • Views: 9100
  • Message 4 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-26, 6:07 AM

Any change in thermal and fan noise behavior?

Reply
Options

58 Posts

12-10-2018

SG

779 Signins

3597 Page Views

  • Posts: 58
  • Registered: ‎12-10-2018
  • Location: SG
  • Views: 3597
  • Message 5 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-26, 6:21 AM

I’m not able to confirm any changes nor improvements in thermals as i did not do any benchmarking previously, i’m just glad that v1.17 did not brick after switching to discrete graphics.

 

Perhaps someone who has done previous thermals benchmarking would be able to advise so.

Reply
Options

19 Posts

10-30-2018

BE

86 Signins

401 Page Views

  • Posts: 19
  • Registered: ‎10-30-2018
  • Location: BE
  • Views: 401
  • Message 6 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-27, 12:43 PM

 wrote:

Starting this thread so people can post their experiences with BIOS 1.17.

 

 

Poll response options (you can copy and paste the applicable option below into your reply):

 

1) Updated to BIOS 1.17 and also changed graphics from hybrid to discrete in BIOS and rebooted successfully.

 

2) Updated to BIOS 1.17 successfully, but have not changed graphics settings in BIOS.

 

3) Still on BIOS 1.15, but planning to switch to 1.17 shortly.

 

4) Planning to stick with 1.15 for now.

 

 

I'll start things off:

I do not use Linux (not currently at least). I have an X1 Extreme and I fall under scenario #3 above - I am still on 1.15, but planning to switch to BIOS 1.17 soon.


For me, that's option 2). But I was already able to switch gfx to discrete on v1.15.

 

@njweb: Thx for the thread! I would also be interested in a 5th option: people on bios v1.17 switching from discrete back to hybrid and rebooting successfully. From my personal experience successfully switching from hybrid to discrete does not guarantee that changing it back from discrete to hybrid will work flawlessly.

Reply
Options

599 Posts

05-24-2018

CA

1231 Signins

9100 Page Views

  • Posts: 599
  • Registered: ‎05-24-2018
  • Location: CA
  • Views: 9100
  • Message 7 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-27, 14:07 PM

I  don't remember exactly but I think in Linux, we can do the switching. Perhaps we should add options for switching via software (one under Windows and one under Linux) in addition to switching under BIOS?

Reply
Options

32 Posts

12-22-2018

US

68 Signins

330 Page Views

  • Posts: 32
  • Registered: ‎12-22-2018
  • Location: US
  • Views: 330
  • Message 8 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-27, 15:15 PM

I have installed BIOS 1.17 on my X1E (4K) and I can report that I've toggled to Discrete graphics and back to Hybrid (and to Discrete again) successfully, and I can still boot into Windows.

 

This non-negative result is not a matter of joy but relief - this should be the normal operation.

 

My next hurdle is to install Ubuntu. I would like to install 18.10 but I ran into the "Failed to open \EFI\BOOT\mmx64.efi - Not found" problem and have not found a suitable workaround.

 

So it may have to be 18.04.1. Which already has problems: when booted off the USB stick, the screen unrecoverably goes black after about 10 minutes. This may be the screen saver, but I don't know because I can't bring the system back unless I turn it off and reboot.

 

If anyone has clues or a workaround, please post !

 

Thanks,

 

Jim

Reply
Options

19 Posts

10-30-2018

BE

86 Signins

401 Page Views

  • Posts: 19
  • Registered: ‎10-30-2018
  • Location: BE
  • Views: 401
  • Message 9 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-27, 17:10 PM

 wrote:

I have installed BIOS 1.17 on my X1E (4K) and I can report that I've toggled to Discrete graphics and back to Hybrid (and to Discrete again) successfully, and I can still boot into Windows.

 

This non-negative result is not a matter of joy but relief - this should be the normal operation.

 

My next hurdle is to install Ubuntu. I would like to install 18.10 but I ran into the "Failed to open \EFI\BOOT\mmx64.efi - Not found" problem and have not found a suitable workaround.

 

So it may have to be 18.04.1. Which already has problems: when booted off the USB stick, the screen unrecoverably goes black after about 10 minutes. This may be the screen saver, but I don't know because I can't bring the system back unless I turn it off and reboot.

 

If anyone has clues or a workaround, please post !

 

Thanks,

 

Jim


Thx for the confirmation on the discrete-back-to-hybrid switch!

For your install, I'm currently typing this in Ubuntu 18.10 on my X1 extreme(ly dissapointed by Lenovo QA), so it is definitely possible.

 

My experience with installing Ubuntu about a month ago (end of november):

- Ubuntu 18.04 didn't install, same issue as you have, but I managed to see that it was always reporting warnings about 'CPU thermal threshold' or something, by switching TTY I think (alt+number or ctrl+alt+fn key, don't remember which). I read somewhere I needed the latest kernel for the x1 extreme, so I went for Ubuntu 18.10 .

- Ubuntu 18.10 did install UEFI-wise, after setting these things in the bios:

  - disabled all secure boot stuff anywhere in the bios

  - switch gfx to discrete

 

Hope that helps. Only thing that doesn't work for me in Ubuntu 18.10 are the backlight control-keys. I'll pbb fix it someday, but haven't really tried yet. For now I adjust brightness with the xbacklight command.

 

Also, if you're up for it, from what I've read Pop!_OS from System 76 seems like the most painfree install for the X1E. And once installed, it seems to have the most decent support for the X1E hardware. Not tested it myself, so don't take my word for it.

Reply
Options

32 Posts

12-22-2018

US

68 Signins

330 Page Views

  • Posts: 32
  • Registered: ‎12-22-2018
  • Location: US
  • Views: 330
  • Message 10 of 28

Re: BIOS 1.17 - User experiences poll. (Fixes BIOS graphics change bricking issue)

2018-12-27, 17:19 PM

Thanks for your reply. Rest assured, I would like to install 18.10, but cannot :-(

 

I was able to boot from the 18.10 USB once, but never again - now I always run into the "mmx64.efi not found" problem when I try to boot. Several other people have reported similar experiences:

 

https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1798171

 

On this web page, user #25 says:

-----
The cause is the system's EFI NVRAM contains variable names starting
"Mok*" - added by the failed installer run.

As a result of theses variables being present shimx64.efi tries to load
"mmx64.efi" and due to it not being in the installer's EFI system partition
it fails with this report.

The problem now is that there is no easy way to remove these stray variables.
-----

 

So how were you able to install 18.10? Were you able to do it on your first boot from USB, were you able to boot more than once, or did you find a workaround that let's you boot more than once?

 

Another suggestion I heard was to copy /efi/boot/grubx64.efi to mmx64.efi on the USB, but since it's a read-only ISO image, I don't know how to do that.

 

Thanks,

 

Jim

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete