03-21-2017 11:56 AM
Good morning everyone.
I installed on my x250 (using a free WWAN slot) M.2 SSD disk - ADATA Premier SP600 256GB M.2 SSD. First installation: April 2016. The disk worked great. After a "BIG windows10 update" the drive began to freeze and died on August 2016. The drive was replaced with a new one. On March 2017 the problem returned (in the new disk) - again began to freeze and died.
From here my question arises - did I make a mistake somewhere? Do dear forumers who did similar installations on their x250 have similar problems? What can I do to prevent the problem on the third drive? During installation I did not mix anything in BIOS etc - just "plug ang play".
I would be very grateful for your help.
03-21-2017 01:08 PM
There isn't anything to screw up. You put it in and turn it on.
03-21-2017 04:32 PM
Total WAG: is that slot intended for a single-sided SSD and the one you're using is double-sided?
There may be mechanical stress or (possibly) heat issues if you're using a double-sided device in a slot not intended for it.
No experience with this ... just tossing it out there...
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.
The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored - questions and answers belong in the forum so that others may contribute and benefit. ... GeezBlog
03-22-2017 03:00 AM
I used a 256GB MyDigital SSD in my X250, which I then upgraded to a 512GB model from ZTE, which is what is in there currently. Both drives work fine and no SSD-related problems were noted during use.
03-23-2017 05:10 AM
Good morning again
Thank you so much for all answers. I installed disk just by plugin it in. M.2 slot looks to be double sided but it is only one way to install the disk. I did not notice any heating problem...
It is possible that the adata disks are just low quality made? I'm really confused ;/