05-20-2019 08:13 PM
I am sorry for your troubles.
You can choose settings as below steps to match your needs.
1. change a regedit value Attributes=2 in belows location.
2. Change the settings of "Lid close/open action" in "Control Panel"->"Power"->in your actived power plan, choose "Change Plan settings" ->"Change advanced power settings"
05-22-2019 01:15 PM
thanks, I tried your soulution but unfortunately did not work.
The computer goes to sleep but then when I close the lid, the coputer still wakes up.
05-24-2019 03:18 AM
Thanks for your information.
I has reproduced the same issue.
During the PC enter Sleep（After press power button , but not fully enter sleep - the LED light is on not flashes)， I slightly turn the lid . -> then wait LED light flashes , -> close the Lid. the PC will Wake Up.
But, if i don't slightly turn the lid before the LED light flashes, the issue not appeared.
I am not sure if we have the same operations.
Would you please recall that whether you have small operations during the PC enter Sleep(for example: slightly turn the lid ).
X1 Carbon 6th support Modern standby, Maybe this issue related to Modern Standby.
05-24-2019 07:43 AM
Hi, thanks. No, I do not have small operations during the PC enter Sleep(for example: slightly turn the lid ). also th pc goes to sleep in 1 second or so, so I would not even able to move the lid or do anythign else.