01-29-2014 07:59 AM
Do what others have said in regards to the BIOS options. Drivers, etc.
It appears to me to be a dongle issue. We have lots of these and some work and some dont. I've literally had one work one time, and not in the 2nd machine. Changed dongles and it worked. I think the dongles are just garbage, (just like the USB Port Replicators are).
A couple of tips, on the X1 make sure the dongle is in the usb 2.0 port, I believe it is on the left. The Helix it does not seem to matter.
Also pause the pxe option when it gets to the screen where it is picking up an IP. Leave it paused for about 30 seconds. Then let it proceed. Fn+P to pause, Enter to resume.
We are using SCCM 2007 R3 SP2 or whatever the latest sp is for R3.
Hope this helps.
01-30-2014 12:56 AM
01-30-2014 01:03 AM
01-30-2014 05:40 AM
I'm not too familiar with MDT. I would put the boot image on a usb stick if possible and boot with that instead of PXE to see if that has any success.
I think the USB on the Helix base are USB 3 so ensure that you have those drivers in the boot image as well as the nic drivers for the dongle.