05-05-2011 08:51 AM
Got an X201 ( 3249-2hu) that bluescreens (000007f) every time it is redocked into the Ultrabase docking station.
Things I've done::
Swapped docking stations
Updated Wireless driver (different issue, but thought I'd mention it anyway)
Updated Power Management
Updated Intel chipset
Disabled bluetooth (resolved a few weird issues with this, thought it was worth trying again)
Client runs a monitor as an extended unit ((2 screens) (We have plenty of these, just wanted to mention it)
Client runs a M$ wireless mouse and we just updated that driver too.
Any other suggestions?
Solved! Go to Solution.
05-05-2011 12:20 PM
05-06-2011 10:05 AM
05-08-2011 02:03 PM - edited 05-08-2011 02:04 PM
I had a similar problem on my X201s on Windows 7 after I've upgraded to Intel HD Graphics 188.8.131.52.12. When my laptop was docked with VGA connection, no problem. But once I activated the Displayport (on HDMI), a big ugly blue screen came to me. The solution is to go the control panel, device manager, Graphic Card, Intel HD Graphic, open it, go to driver and update driver to the previous version : Intel HD Graphics 184.108.40.206.02. It solved my problem. I hope this bug will be fixed in the next release.
12-06-2011 06:28 AM
Just saw I neevr updated this. Turned out it was the shell itself. A bad pin under her laptop. All is well (or she grew tired of complaining about it, one or the other..)
12-11-2011 06:15 PM
I have a similar problem. i have a X201 (3626) running Windows 7 and have 2 docking stations, one at office one at home.
My computer will go blue screen everytime it is restored from sleep/hibernate from a different dock other than the one i put it on sleep/hibernate.
I went to the minidump and found the below. I have updated BIOS, power management, chipset, graphics driver still no use.
FAULTING_MODULE: fffff80003059000 nt
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
00000000`00000001 ?? ???
EXCEPTION_RECORD: fffff880038c0188 -- (.exr 0xfffff880038c0188)
ExceptionCode: c0000005 (Access violation)
Attempt to execute non-executable address 0000000000000001
CONTEXT: fffff880038bf9e0 -- (.cxr 0xfffff880038bf9e0)
rax=0000000000000000 rbx=fffffa800a077a70 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=fffffa800aa381d0
rip=0000000000000001 rsp=fffff880038c03c8 rbp=fffffa8003d624c0
r8=fffff880038c0450 r9=0000000000000000 r10=fffffa8003b3baa0
r11=fffff880038c03c0 r12=0000000000000000 r13=0000000000000040
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0000 ds=002b es=002b fs=0053 gs=002b efl=00010246
00000000`00000001 ?? ???
Resetting default scope