English Community

ThinkPad NotebooksThinkPad: X Series Laptops
All Forum Topics
Options

2 Posts

12-26-2014

3 Signins

37 Page Views

  • Posts: 2
  • Registered: ‎12-26-2014
  • Location:
  • Views: 37
  • Message 1 of 3

X220 PCI express diagnostic test failed Error code WPE001001-WJDXRK

2014-12-26, 18:10 PM

I ran the PCI Express Test using the PCI Express diagnostic test tool. This is the result I got. Appreciate if some one can help. This is the log I got

UDI:       Pci Express System

PCI0:      0:1b.0

PCI1:      3:0.0

Resources:         

Resource type: Device

Index:   0

Bus:       0x0

Device: 0x1b

Function:             0x0

Device Connected:          NO

Vendor Id:          0x8086

Vendor Name:  Intel Corporation

Class:     0x4

Class Name:       Multimedia controller

Subclass:              0x3

Subclass name: Audio device

Resource type: Device

Index:   1

Bus:       0x3

Device: 0x0

Function:             0x0

Device Connected:          YES

Vendor Id:          0x10ec

Vendor Name:  Realtek Semiconductor Co., Ltd.

Class:     0x2

Class Name:       Network controller

Subclass:              0x80

Subclass name: Network controller

12/26/2014 12:34:02 - Status Test

12/26/2014 12:34:02 - Warning Fatal Error Detected in PCI device present on Bus: 0x3 Device: 0x0 Function: 0x0.

                Failed (0s)

Thanks

Reply
Options

3019 Posts

03-15-2014

Bangalore

1126 Signins

57257 Page Views

  • Posts: 3019
  • Registered: ‎03-15-2014
  • Location: Bangalore
  • Views: 57257
  • Message 2 of 3

Re: X220 PCI express diagnostic test failed Error code WPE001001-WJDXRK

2015-01-02, 12:12 PM

Hi Volante18,

 

Welcome to Lenovo Community!

 

As per the query we understood that you are facing issue with Hardware scan error on your ThinkPad X220.

 

  • The test result is indicated to Network controller, please let us know have you done any changes in the system hardware?
  • Run thinkvantage system update utility to check for the latest drivers and application for your system and will install it.
  • Please provide the system MTM (Machine Type Model) number, not the system ‘Serial’ number.

Hope this helps.

 

Best regards,

Hemanth Kumar



Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Follow @LenovoForums on Twitter!

Reply
Options

6 Posts

01-01-2015

10 Signins

126 Page Views

  • Posts: 6
  • Registered: ‎01-01-2015
  • Location:
  • Views: 126
  • Message 3 of 3

Re: X220 PCI express diagnostic test failed Error code WPE001001-WJDXRK

2015-01-03, 13:59 PM

Hi,

 

I think some harware which is attached to the PCI Slot got some issues.Please perform a lenovo diagnostics for memory by tapping F10 during start up,if it is pre-loaded or download diagnostics from lenovo support site by entering the MTM Number and use a bootable pendrive to perform it.

 

To create Bootable USB on windows,download the bootable diagnostics image from the Lenovo website.
The instructions for downloading the image is found on the same webpage as this readme file.

Copy the bootable-generator-10.exe file and the image file (for example, linux-bootable-cd-2103639.iso) into one folder
Plug the USB Key into your computer
Log in to Windows and launch command window with Administrator privilege
Navigate to the folder where the you copied the two files run this command:
bootable-generator-10.exe --create -l <Drive Title> -u <Drive Letter> -f <Image name>
Where
<-1> is the new name of the USB key (limit of 11 characters)
<-u> is the drive letter assigned to the USB key
<-f> is the name of the image
For example
If the USB key you has been assigned as Drive "I" by Windows, and the image you downloaded is "linux-bootable-cd-14.iso", and you name the USB key "bootablelinux", the command would read as follows:
bootable-generator-10.exe --create -l bootablelinux -u i -f linux-bootable-cd-2103639.iso
At the prompt, type "y" and press the "Enter" key to format the USB Key and start to create the bootable diagnostics tool
Other Switches
There are two other switches accepted by this tool

--help Displays the help message for the tool
--List Lists all of the USB keys plugged in to the system

Limitations
The SATA Controller Mode needs to be set to AHCI in the system BIOS if the system doesn't use UEFI BIOS for storage device related diagnostic functions
Other Switches
There are two other switches accepted by this tool

--help Displays the help message for the tool
--List Lists all of the USB keys plugged in to the system
Open source code
For any open source code used in genearting this application, you can download it at
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT073284

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete