cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 280
Message 11 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

I cant acces to bios. F1 does not work anymore.

JDGillis
Bit Torrent
Posts: 3,036
Registered: ‎12-11-2015
Location: US
Views: 276
Message 12 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

Is your system an X131e like the one listed origionally in this forum thread?

rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 274
Message 13 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

My laptop is Lenovo Thinkpad x131e, Intel i3, 4Gb ram. When error start the operative systeam was Windows 10, then I erase all HDD disk to install Windows 10 without any error, but Bios continues witout access. only show the error: The non-volatile....

JDGillis
Bit Torrent
Posts: 3,036
Registered: ‎12-11-2015
Location: US
Views: 273
Message 14 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

Also what preceeded this error, did you recently update the BIOS.      Any additional information on how it got to its curent state would be helpful.

rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 269
Message 15 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

Yes, I updated Windows 7 to Windows 10 and update some drives and bios with Lenovo Update Tool

JDGillis
Bit Torrent
Posts: 3,036
Registered: ‎12-11-2015
Location: US
Views: 266
Message 16 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

If you cannot access the BIOS, it sounds like a BIOS update may have gone bad.     There is a new BIOS for that system that just released on December 28th, so perhaps that version has a problem.

 

If you have not tried already, you might try removing the main battery, the bottom cover, and then unplug the CoinCell/CMOS battery for a few minutes to reset the BIOS, and and then reassemble and see if that helps.

 

capture.jpg

rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 258
Message 17 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

I did the procedure, left the CMOS battery for 20 minutes. Now give me 0271: Real Time Colck error and Error: The non-volatile variable storage is about fail continues and F1 does not work, I can not enter to Bios...with 3 beeps at start

Any solutions??

JDGillis
Bit Torrent
Posts: 3,036
Registered: ‎12-11-2015
Location: US
Views: 244
Message 18 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

The realtime clock error is not a problem, it just resets the time when you reset the bios.

 

What happens if your try booting with the HDD removed?    Can you enter the BIOS?

 

 

rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 240
Message 19 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

No, same error

0271: Real Time Colck Error - Check Date and Time settings.

Error: The non-volatile variable storage is about full.

 

Press F1 to enter Setup.

 

Do not boot into Setup

Removed HDD and booting without HDD continues the error, too removed the CMOS battery and booting same error.

rareza35
Paper Tape
Posts: 8
Registered: ‎01-04-2019
Location: MX
Views: 239
Message 20 of 20

Re: x131e fails to start BIOS Setup with F1 (Error: the non volatile variable storage is about full)

I search how reset CMOS...to try fix the error.  Like this http://www.ja.axxs.net/x130e.htm , Do you recommended to do this??

Check out current deals!


Shop current deals

Top Kudoed Authors