cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
bdalax
What's DOS?
Posts: 3
Registered: ‎06-13-2019
Location: IL
Views: 159
Message 1 of 3

x250 screen not responding after bios update

Hello,  please help me gain my x250 again

I Have update to bios v.1.36 via Lenovo system update

And now I can work only with an external display. My screen is not responding at all.

Hope someone can help, tried everything I know.

Thanks a lot

Golan

Social Support Agent
Social Support Agent
Posts: 570
Registered: ‎08-02-2018
Location: US
Views: 109
Message 2 of 3

Re: x250 screen not responding after bios update

Hi bdalax!

 

Thanks for posting in the Community,

 

Try pressing F5 / Fn+F5 and check for changes afterwards. If it's still the same, access BIOS and check Boot Display Device under Configuration Tab,

 

https://support.lenovo.com/us/en/solutions/ht500222

 

Make sure that the Boot Display Device is set to Thinkpad LCD. After setup, press Fn+F10 / F10 to exit saving changes. Update us how it goes.

 

Regards,



Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Follow us @LenovoSupport on Facebook and Twitter!

bdalax
What's DOS?
Posts: 3
Registered: ‎06-13-2019
Location: IL
Views: 98
Message 3 of 3

Re: x250 screen not responding after bios update

Hi thanks for replying so fast!
I appreciate it.
Solved the problem by opening the laptop and pushing the flat cable tight to the mother board, turns to be that somehow it was a little loss cause after I checked it worked fine.
Thank you.

Check out current deals!


Shop current deals

Top Kudoed Authors