02-27-2012 02:27 AM
I am using X200 - 7450 WPR, with single touch display.
Is it possible to change my LCD panel with a multi touch display panel ?
please help me in this !!!!!1
02-28-2012 03:49 AM
I don't know the X200, but you can try the multitouch driver:
03-03-2012 10:31 PM
thanks for your reply..
Its not the problem with the driver.
The one I am using now is support only the pen touch. There are some other model in X200 tablet series with multi touch.
So what I am asking is IS IT POSSIBLE TO USE THE MULTI TOUCH DISPLAY ON MY X200 ?
03-04-2012 04:31 AM
"The new multitouch screen, a $200 option, uses a high-quality capacitive touch digitizer to register input from two fingers at once, allowing users to perform such multitouch gestures as pinching to zoom or swiping two fingers to scroll. In testing, the screen was highly responsive, and only a light touch was required for it to register".
It seems you had to pay the extra $200 when you purchased it...
03-06-2012 09:19 PM
thank you so much again..!
I am ready to pay for the extra LCD.
But the confusions are:
Do I need to change the LCD cable also ?
The multi touch LCD FRU is out of stock with IBM. So can I get it from any third party ?
03-09-2012 02:32 PM - edited 03-09-2012 02:32 PM
Cables are different. Lid is different. Microprocessor card is different. Side brackets are different The only way to guarantee compatiblity is to buy parts with Lenovo FRU numbers. If you change the panel yourself, you will void any warranty that is remaining. If you buy all these parts, you may end up paying as much as the machine is worth, unless you can find a whole assembly. You would probably be better off selling yours and buying a replacement.
03-15-2012 04:39 AM
I checked the HMM for X200 tablet and found that the model number (MT/M) rof my laptop ( 7450) the multi touch display category.
Please lenovo we hope you will give a perfect answer !