07-12-2018 08:56 AM
I'm unable o update the TPM firmware in an X1 Tablet (model type 20GG003UUK).
The firmware update utility reports:
When I perform the update it says it is updating to 6.43. It appears to work, in that it says it is doing the flash, the tablet reboots, but afterwards, when I run the utility again, it remains on 6.40. Here's the log from the update...
[2018/7/12 16:26:51] TpmUpdt.exe version 220.127.116.11
OS = Windows 10 64bit
Checking TPM status.
TpmFwChk TpmStatus: 1
TPM Manufacturer: Infineon
Current TPM Firmware Version: 6.40
New Firmware Version: 6.43
AC adapter/Battery check....OK.
TPM FW Flashing....TPM FW Flash completed.
I'm running this from an admin account using 'run as administrator' on Windows 10 Pro 1803.
I'm doing this because of the advisory here:
Can someone assist with getting this updated?
Solved! Go to Solution.
07-13-2018 05:43 AM
You need BIOS version 1.76 or later
<1.76> UEFI: 1.76 / ECP: 1.23 - (Fix) Fixed TPM firmware update issue with TPM 1.2. - (Fix) Fixed a mismatch issue between the Intel(R) ME configuration and FPF fuse settings. - (Fix) Fixed an issue where Date and Time is not protected by Supervisor Password in BIOS Setup.