cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
KrowBar
Punch Card
Posts: 12
Registered: ‎06-28-2016
Location: US
Views: 91
Message 11 of 12

Re: Cannot use OneCLI config show on Flex Chassis SN550 computenodes

Ok, now I feel like a goofball but I'm learning to get better at it ;^). I had originally approached this like previous chassis/compute nodes where the authentication of an IMM on a compute node was controlled by the CMM and even above that with the xclarity admin. there was no local (ipmi) ID at the compute node IMM level, although we can add one. the newer systems come with the local xXCC ID already created and I was able to leverage that ID to success. as for the passwords you noticed earlier, that was two examples from two seperate machines.

so, in short, I have the onecli working against the SN550's as expected, see below/attached. the older nodes (8737's) are a little less agreeable, but seem to also work once the IPMI ID is added at the IMM level.

 

thanks for the help.

 

 

Highlighted
Lenovo Employee ccchen
Lenovo Employee
Posts: 174
Registered: ‎09-03-2018
Location: US
Views: 61
Message 12 of 12

Re: Cannot use OneCLI config show on Flex Chassis SN550 computenodes

Hi KrowBar,

 

Thank you for letting us know that the onecli utility failed to run in OOB mode with BMC connection parameter issue was resolved by adding a new IMM user account that has access to the IMM console.

Glad to hear the issue was resolved! 

Check out current deals!


Shop current deals

Top Kudoed Authors