02-25-2011 05:44 AM
Any further news on this as I also have the same problem. I believe it is due to the Lenovo specific Intel Driver (as mentioned above) but there appears to be no other version available. Does nyone know if manually installing SP1 will cause any problems?
02-27-2011 11:40 AM
I have had my G460 for about a week and wanted to upgrade my Window 7 Ultimate to Service Pack 1 (SP1), but it is not being offered by Windows Update. I tried the Windows Update troubleshooter and downloaded the Microsoft System Update Readiness Tool - to no avail.
Checking microsoft support Article ID: 2505743 (http://support.microsoft.com/kb/2498452 ) why I wouldn't be offered SP1 update, it says:
Check whether you have Intel integrated graphics driver IGDKMD64.SYS and whether you upgraded the driver - Windows 7 SP1 will not appear in Windows Update if update 2454826 is not installed. Windows Update will not offer you update KB2454826 if you are using one of the following Intel integrated graphics drivers:
It also says: If you have the Intel integrated graphics driver and driver version 126.96.36.1994 through 188.8.131.52, visit the computer manufacturer's website to see whether a newer driver is available. Unfortunately, 184.108.40.2064 is the only driver on the Lovono driver site: Intel Onboard Graphics Driver Intel 220.127.116.114 2010-08-31 32.0 MB Windows 7 64bit
Is there another way to get an updated driver? Or another way to get SP 1?
02-28-2011 12:58 AM
Windows 7 SP1 will not appear in Windows Update if update 2454826 is not installed.
Windows Update will not offer you update KB2454826 if you are using one of the following Intel integrated graphics drivers:
- Igdkmd32.sys (32-bit), versions 18.104.22.1684 through 22.214.171.1241
02-28-2011 06:16 AM - edited 02-28-2011 06:20 AM
Finally, I'm able to download SP1 after I update my Intel HD Grapchic driver to newer version.
Just for your info,'
We need to uninstall first the exist driver version of Intel HD from our laptop. After that, we can install online the newest version from internet.
Issue resolved for me
Thanks a lot for your all advise
02-28-2011 07:31 AM
I would suggest you wait for the driver to be made available for your system from the Lenovo website. If it is not there now, then it is not ready for your system. The 64 bit testing may have not finalized and they will not release it until it passes all the tests. It is more than likely that they have run into a problem and are working on it.
If you have not received SP1 via windows update, you can download it from the MS download site, however that would not be advisable as you may end up with BSODs with this driver being a key prerequisite. NB: The distributed version (WU version) of SP1 would be the one that you should use. If you chose not to wait and take the risk, then that is up to you. If you do this, I would suggest you have the SP1 uninstaller available, get all your apps to the latest release levels and take a full system backup. Good luck.
03-02-2011 12:14 PM
This silence from the staff members and the fact that Lenovo seem not caring about updating us with newer drivers is killing me!!!
Please bare in mind that although there is lenovo presence in the forum, nevertheless this is a user-to-user community, and not official support channel with staffed lenovo personnels.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350Apple:- Macbook Air [Snow Leopard]
03-04-2011 06:06 AM - edited 03-04-2011 06:12 AM
When I tried to install SP1 on Windows 7 it failed with the cryptic error 0x800f0a12. This is the story of how I fixed it.
According to Microsoft that error is related to problems to access the system partion: http://windows.microsoft.com/en-US/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-inst...
My PC is a Lenovo ThinkPad T60 that was originally bundled with Windows Vista installed. In november 2009 I upgraded the system to Windows 7. The rescue partition (which hosts ThinkVantage Rescue & Recovery) is still based on Windows Vista.
I also have Ubuntu installed on other partitions on the same disk, with Grub in the MBR.
I found some other people encountering the same error in Microsoft forums.
My problem was that Windows was not able to access the BCD (the boot configuration data).
You can check if you have the same problem by launching a command prompt with full Administrator right and type:
If this succeed, you have a different error than mine and this howto may not be appropriate for your problem.
If it fails with "access denied", you have not launched the command prompt with full administrator access rights.
If it fails with "can not find BCD information" (this is not the exact message), you may have the same error than me. The problem is that Windows is not able to find the Boot\BCD file that the SP1 have to modify.
The detailed instructions to fix the BCD problem are here: http://support.microsoft.com/kb/927392
You have to boot with your Windows 7 DVD and access to a command prompt.
In my case, it looks like that the BCD from the recue partition was the cause of the problem. I had to delete both C:\boot\BCD (BCD of Windows 7 on partition 1) and D:\boot\BCD (BCD of Windows Vista recue on partition 0). Removing only C:\boot\BCD was not enough.
C: cd \Boot dir /a attrib -s -h -s ren BCD BCD.20110304 D: cd \Boot dir /a attrib -s -h -s ren BCD BCD.20110304
The final step was:
You know that the problem is fixed when "bcdedit /enum" works.
You can now reboot and reinstall SP1.