Showing results for 
Search instead for 
Did you mean: 


After updatinging via windows store to Windows 8.1  I get the watermark:

"Windows 8.1 SecureBoot isn't configured correctly Build 9600"



I've gone to the BIOS, tried enabling secure boot, disabling, restoring factory keys but nothing solves the problem.

The command (administrator windows powershell) Confirm-SecureBootUEFI returns false.



There may be multiple ways to resolve this.  Here are two possible approaches:


Solution 1

Microsoft has released a KB tip for this issue. Check it out here: 

Update removes the "Windows 8.1 SecureBoot isn't configured correctly" watermark in Windows 8.1 and ...


Solution 2

Do a full shutdown - (hold shift while selecting shutdown)

Restart and enter BIOS (F1).
Go to Security > SecureBoot > enable it.
Note: This will also disable CSM and set unit for UEFI Only startup. These are required for SecureBoot to work.



Solution 3


Community members have indicated succcess with the following proceedure:


1- Tap the windows button and search for "startup"

2- Click "Change advanced startup options"

3- Under "Advanced startup" click "Restart now"

4- Click "Troubleshoot"

5- Click "Advanced options"

6- Click "UEFI firmware settings

At this point you should see the bios/uefi configuration page:

7- Go to "security" and then "reset to setup mode"

8- Then go to "exit" and then "exit saving changes"


Once back in windows, repeat all the steps 1 to 6 and then in the bios screen:

- go again to "security" and this time select "restore factory keys"

- Then go to "exit" and then "exit saving changes"



Was this information helpful?


Microsoft has published a patch to deal with this watermark error message. See

Yes it can be fixed with Microsoft KB that just released recently. Thanks ctjchan!


hello my lenovo ideatab A1000L after i reset never be on. power lost




mon Pc - Z710 idealpad depuis passage de 8 en 8.1, j'ai des gros ennui avec le wifi qui disparait avec la commande 


de mise en veille ,et le moyen pour retouver le wifi ,il faut appuyer sur le bouton ON/OF  pendant 5 secondes pour


récupérer le wifi , voila et cela a chaque commnde de mise veille .quel dommage ,je ne sais pas si c'est windows


aprés passage en 8.1 ou l'ordi lui même . J' attendais peut être une mise a jour qui solutionnerais ?


j'ai voulu voir si les pilotes de carte wifi Broadcom  802.11n est a jour ; il n'est pas prévu de pilotes pour win  8.1?


Vraiment déçu de mon achat de PC Lenovo le 03/2014 , et pas de sav en Fce !! Déçu  vraiment .


I Have  lenovo c260. i want to downgrade windows from windows 8 to windows xp.I have smart solution