03-07-2017 01:50 AM - edited 03-08-2017 12:57 AM
Normaly when iam writing with the pen on the sketch pad, i have normally to touch the sketch pad
Now when iam hovering my pen over the sketch pad unintended lines are drawed. how can i solve this problem
BTW when iam moving the pen on the touchscreen a bleu selecting rectangle is shown, like a right mousebutton is pressed
Solved! Go to Solution.
03-08-2017 01:35 AM
Thanks for using the Lenovo forums.
I don`t have access to this unit myself, but by the sounds of it, this is a faulty pen, it may be that the tip is sticking in too deep pushing down on something, try to see if you can use another tip/pen if possible.
Hope this helps, let us know how you get on.
Did someone help you today? Thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
03-08-2017 04:15 AM - edited 03-08-2017 11:12 AM
Thank you for your reaction
the tip is correctly inside the pen. it has been wet, i suppose there is no kind of electronics inside the pen
or is there?
 checked your remark about an other tip, but it gives the same result.
03-28-2017 11:22 PM
As I explained my pen was wet, washed in the washingmachine.
I reset the tablet to fabricsettings end still the problems where there.
I didnt used my tablet now for 14days and suddenly its working normally. I suppose there is something in the pen which shouldnt be wet and drying the pen is i suppose the sollution.