Showing results for 
Search instead for 
Did you mean: 
Fanfold Paper
Posts: 6
Registered: ‎02-08-2014
Location: Chile
Views: 368,240

Re: Laptop Wont Boot (BLACK SCREEN) after enabling "Intel virtual technology" HELP


The problem wasn't intel virtual technology, the problemas was Lucidlogix's virtu mvp, because this software unlocks your BIOS and let you change stuff you shouldn't change, corrupting the BIOS



Since you can't extract the battery of the Z400 to do the bios reset trick, I had to figure out another way to do it.

1. Unplug AC adapter

2. Connect every usb power consumer in laptop's ports (phone for example)

3. When battery runs out of charge keep trying turning on your laptop, until the battery led won't flash anymore

4. When the battery is completely discharged, press and hold the power button for 10 seconds (I did this 3 times every 10 minutes to be 100% sure)

5. Plug your AC adapter and boot normally

6. Never touch your BIOS again!!!!!!!!!!!

Who Me Too'd this solution